Satan and Dr. Faustus, overreachers in their own different ways Term Paper

Satan and Dr. Faustus, overreachers in their own different ways - Term Paper Example In Paradise Lost, it is seen that Satan had to exercise his own will, and this was in contrary to the will of God, â€Å"thou against his thy will/ chose freely† (Eliot, 8). All creatures of God who fall in Paradise Lost are â€Å"sufficient to have stood, though free to fall (Fluchereand Henri, 32). Festus  a man, who is brilliant, tends to have reached the natural knowledge limits. He is an early sixteenth century scholar in Wittenburg, the German city (Gregg, 5). He is fiery, arrogant and has a thirst for knowledge. Faustus as an intellectual, who is familiar with issues such as demon astrology and summoning that is usually not taken to be an academic subjects by the current universities. It is seen that Faustus makes a decision of selling his soul to the devil in exchange for knowledge and earthly power as well as 24 years as an additional life (Sachs and Ariel, 31). He goes on to waste his time on low tricks and self-indulgence. Faustus is seen to be the key character in the play, which consists of few characters that are seen to be truly developed. From the Hebrew, destroyer, mephitz and liar, tophel, Cunning and Craft devil. He is the devil who appears at the summoning of Faustus', as well as the devil that has the role of serving Faustus for a period of 24 years. In Mephostophilis, also referred to as Miphostophiles or Mephistopheles, as well as Mephisto, tends to be a latecomer in the recognized demons’ hierarchy. He was created possibly for the legend, Faustus.   Ã‚  Ã‚  Ã‚   In the play of Marlowe, Mephostophilis is seen to have layers to his own personality. He broadly admits that ‘‘separation from God is anguish,’’ and is capable of pain and fear. But he is known to be a gleefully evil, who participates at every level in the destruction Faustus. Not only does Mephostophilis influence Faustus to go on to sell his soul; but he as well encourages him to waste his 24 years of power. It is also seen that the Servant to Faustus steals the books of Faustus and learns how he can summon demons. He tends to be concerned about the fate of his master at the end of the play. Inner turmoil of Faustus suggests contradicting advice to him at major points. Their characters as well reflect the belief of Christian that humans have been assigned guardian angels, and in this context, the devil has the capacity of influencing the human thoughts. Satan. "Lucifer" original known as Venus, refers to the brilliance of the planet. In Christian context, Lucifer is sometimes believed to be another name of Satan. Some traditions believe that Lucifer was the name of Satan before the fall, while the Catholic Church Fathers held that Lucifer was not the proper name of Satan but instead a word indicating a the beauty and brilliance of his station before the fall. He appears at a few choice moments in Doctor Faustus, and Marlowe uses "Lucifer" as Satan's proper name (Weil, Judith and Marlowe, 14). Satan broadly admi ts that God created him, and he was seen denying this at other occasions, and he never rebelled due to God was unjust, but because his ambition caused him to desire to overreach his place. More so, he is seen to admit that he was at will in choosing that his pride forbids him to repent. Furthermore, if he might repent, later his ambition might again result to a rebellion as well as

Failures Of The Juvenile Justice System Criminology Essay

Failures Of The Juvenile Justice System Criminology Essay Juvenile justice systems across the country are experiencing major challenges resulted in a failure to meet their original goal to change the deviant behavior of the juvenile delinquent by focusing on rehabilitation in order to ensure juveniles have an opportunity for a future life as a productive citizen. Despite this goal juvenile justice system, in many cases, has failed to rehabilitate the juvenile and instead have become more prone to placing juvenile delinquents in juvenile detention facilities, or trying them as adult offenders. Once the juvenile delinquent becomes a part of the system, adult or juvenile, they have difficulty escaping from the stigma and moving on to create better lives. Instead of delinquents making positive changes in their life, they instead graduate up to adult prison and become adult criminal offenders. These failings within the juvenile justice system can be attributed to the lack of education, lack of support services and an inability to incarcerate the more serious juvenile offenders. In fact 80% of juveniles who enter New Yorks juvenile facilities end up returning or graduating to adult prisons within three years (Louis, 2008). This recidivism rate is 20% higher that the New York adult criminal justice system. In other states, such as Oklahoma or Texas, the rate is even higher. The juvenile justice system has also failed to provide a fair and equal juvenile justice process which is obvious based on the racial disparities present in Americaà ¢Ã¢â€š ¬Ã¢â€ž ¢s juvenile justice system. Minorities, African Americans especially, are placed in juvenile detention centers or receive waivers that require them to be tried as adults. These failures have been attributed to the delinquent or criminal behavior of the minority by the juvenile justice system but by critics it has been attributed to racial profiling of police and bias in the juvenile courts. The fact is in the juvenile justice system there have been many failures that have resulted in many challenges. These challenges make it difficult for the juvenile justice system to meet its original goal of rehabilitation and have resulted instead with juveniles that are not reformed but instead have the tools to become adult offenders. When juveniles are removed from their homes and placed in a juvenile detention they do not become reformed but instead there behavior will worsen in this type of an environment. Juveniles that are laced in detention centers are faced with becoming more aggressive than the next juvenile just to survive. Instead of learning to become more productive members of society the juvenile learns new criminal skills. Juvenile offenders in current society commit the same delinquent acts of the past but they also commit offenses that are far more serious and violent than when the juvenile justice system was first established. Instead of rehabilitating juvenile and taking steps in repairing the family the juvenile justice system has been quick to punish the juvenile. The lacking of effective counseling services for juvenile delinquents before and after being detained or incarcerated has been considered a large part of the overall problem in the juvenile justice system as well as a very low success rate in making positive changes in the life of the juvenile offender. The research will seek to understand the extent of the failures of the juvenile justice system by presenting statistical research and real world examples of these failures. The better juvenile justice professionals understand the failure of the system the more effective they can be in developing more effective measures for ensuring the juvenile learns new and positive behavior and does not grow up to become an adult criminal offender. Through rehabilitative services and programs the juvenile will have an opportunity to make positive changes in their lives and become more productive members of society. Literature Review Research has shown that the juvenile justice system has failed in their goal to rehabilitate juveniles to ensure they do not grow up to become adult criminals. In research conducted by Annie Casey Foundation it was discovered that the juvenile justice system is ineffective, dangerous, and inadequate. Instead of investing in the future of juveniles the system is just focused on punishing the juvenile and removing them from society. Juveniles that are detained or that are adjudicated to the adult court system are not taught new positive behaviors that assist them in becoming upstanding members of society and instead they learn new criminal behaviors. In Oklahoma, precisely the Creek County area of Oklahoma, which is likely one of the highest areas of juvenile offenders in the state there exists a definite problem of dealing with the issues of juvenile crime. Furthermore, the juvenile justice system has no real punitive measures that can be put in place to deal with juvenile offenders who should be removed from society. The lacking of effective counseling services for pre-incarceration level and post-incarceration level offenders has been considered a large part of the overall problem in the State of Oklahoma. In fact despite the proof that rehabilitative programs can work the state has failed to aggressively implement them and prefers instead to detain or incarcerate. The Juvenile Re-entry of Oklahoma County program is one such program that has been shown to be successful with only a 10% failure rate (Kelly, 2010). The program provides the juveniles with an opportunity to obtain their high school diploma or G.E.D and an opportunity to learn a new job skill. In a recent analysis of the program it was discovered that many of the participants not only obtain their education but go on to obtain their college degrees. The state of Texas has one of the largest the juvenile justice populations in the country and juveniles are detained in a large majority of cases. The Texas juvenile justice system has large caseloads where juveniles in some cases will be detained for a year without ever going in front of a judge. The judges in the state are quick to detain the juvenile because the state has become limited in the resources available to rehabilitee the juvenile offender. In New York the juvenile justice system became so corrupt and the treatment of juveniles so inhumane the governor called for a complete overhaul and reform of the New York juvenile justice system (Louis, 2008). Juveniles were routinely restrained while in custody and left face first on the ground for hours. Juvenile justice officers were known for being cruel and aggressive. Since the reform efforts the juvenile receive discipline but is not subject to inhuman treatment. Perhaps one of the alleged problems are the extremely restrictive laws which were passed as result of the 14th Amendment of the Bill of Rights. Whereas; juvenile offenders are to be handled in such a restrictive manner as it give the offenders the idea that thereà ¢Ã¢â€š ¬Ã¢â€ž ¢s nothing the system can do to them, in such a case like Thompson V. Oklahoma, where the State of Oklahoma petitioned to charge the defendant as an adult for premeditate murder, or 1st degree murder, which was approved and Thompson was so tried and convicted, to be later overturned by the U.S. Supreme Court (487 U.S. 815, 1988). The trend for the juvenile justice system to detain the juvenile over finding effective rehabilitative services is not the only challenge facing juvenile justice systems across the nation. After a two-and-a-half year investigation by the Civil Right Division it was discovered similar to the adult criminal justice system that the minority is treated more harshly than the non-minority. The research showed that law enforcement, which has discretion in what happens to the juvenile, is far more likely to detain the minority juvenile and release the non-minority juvenile into the custody of their parents or guardian. The report also said black juveniles were treated more harshly than white teenagers in detention practices and transfers to criminal court to be tried as adults (Dries, 2012). As a result there is a major overrepresentation of minorities in both the juvenile and adult justice systems. All criminal offenders in the juvenile justice system should be guaranteed an equal and fair juvenile justice process but this is just not the case. While juveniles are afforded some due process rights, the juvenile justice system is not focused on equality or even justice. It is instead focused on punishing juveniles for their bad behavior. When juveniles are placed within juvenile detention centers instead of sent being home with their parents and being required to attend rehabilitative programs and services that will assist them in changing their behavior and leading a more positive lifestyle. Research has shown that juveniles that are placed in juvenile detention centers are seven times more likely to grow up to become adult criminal offenders or to be tried as an adult while juveniles. Further, those who ended up being sentenced to juvenile prison were 37 times more likely to be arrested again as adults, compared with similarly misbehaved kids who were either not caught or not put into the system (Szalavitz, 2009). The failure to employ rehabilitative services has resulted in a growing juvenile justice population.

The Hot Zone Essay -- essays research papers

AUTHOR: Richard Preston PUBLISHER: Random House DATE OF PUBLICATION: 1994 Setting: The setting g takes place in two major places. Reston Maryland which is a suburb of Washington DC. and the second major area is in Kenya Africa. The story takes place in the 1980's. Main Characters: Since this story is a true story there is no one character that is a main character. The author does not create the story around any one main character so I'll just list every character I can remember from the book. 1. Charles Monet: He was the first host to the deadly ebola virus breakout in Africa. He was 56 years old and was kind of a loner according to the authors interviews with people. 2. Dr. Mosoke: He was Charles Monets doctor when Charles crashed and bled out which means when the host suddenly starts bleeding infectious blood out of every orifice in the body. 3. Nancy Jaax: She was a veterinary pathologist at a military fort in Maryland.. 4. Jerry Jaax: He was a veterinarian and husband to Nancy Jaax. 5. Peter Jahrling: He was a disease expert at Fort Detrick 6. Gene Johnson: He was in charge of the Reston operation. He also was the discoverer of Ebola Sudan. 7. Nun: The Nun's name was unknown but she had the very first recorded case of Ebola Zaire which is the most dangerous of the three strains. Summary: This is a true story. On New Year's Day 1980 a man named Charles Monet went on a trip with a girl friend of his up to Mnt. Elgon in West Kenya. They spent the night there and went to a l...

Key Concepts and Network Architecture for 5G Mobile

G technology is offering the services in Product Engineering, Documentation, supporting electronic transactions (e-Payments, transactions) etc. As the customer becomes more and more aware of the mobile phone technology, he or she will look for a decent package all together, including all the advanced features a cellular phone can have. Hence the search for new technology is always the main motive of the leading cell phone giants to out innovate their competitors. The ultimate goal of 56 is to design a real wireless world that is free from obstacles of the earlier generations.This requires an integration of networks. This paper represents, introduction to 56 technologies, Key concepts of 56, Features of 56 networks technology, applications, hardware and software for 56 technologies and network architecture for 56 wireless technologies and last section conclude the paper. Keywords?G, www, JIB, DAWN, ‘P, Wi-If INTRODUCTION 56 Technology stands for 5th Generation Mobile technology. 56 technology has changed the meaner to use cell phones within very high bandwidth. 56 is a packet switched wireless system with wide area coverage and high throughput. 6 wireless uses FOOD and millimeter wireless that enables data rate of 20 Mbps and frequency and of 2-8 GHz. 56 is going to be a packed based network . The 56 communication system is envisioned as the real wireless network, capable of supporting wireless World Wide Web (www) applications in 2010 to 201 5 time frame. There are two views of 56 systems: evolutionary and revolutionary. In the evolutionary view the 56 (or beyond 46) systems will be capable of supporting www allowing a highly flexible network such as a Dynamic Dados Wireless Network (DAWN).In this view advanced technologies including intelligent antenna and flexible modulation are keys to optimize the dados wireless networks. In revolutionary view 56 systems should be an intelligent technology capable of interconnecting the entire world without limits. An example application could be a robot with built-in wireless communication with artificial intelligence. User never experienced ever before such a high value technology. The 56 technologies include all type of advanced features which makes 56 technology most powerful and in huge demand in near future.Amazing isn't it such a huge collection of technology being integrated into a small device. The 56 technology provides the mobile phone users more features and efficiency than the 1000 lunar doodle. A user of mobile phone can easily hook their 56 technology gadget with laptops or tablets to acquire broadband internet connectivity. Up till now following features of the 56 technology have come to surface- High resolution is offered by 56 for extreme mobile users, it also offers bidirectional huge bandwidth. – 56 technology excellent quality service is based on Policy in order to evade errors. It provides transporter class type gateway that has unequalled steadiness. – The 56 technology billing interface is highly advanced making it efficient and appealing. – It offers huge quantity of broadcasting data, which is in Gaga Bytes, sustaining more than 60,000 connections. – This technology also provides remote diagnostic feature. – Provides up to 25 megabytes per second connectivity. Also it supports the private virtual networks. KEY CONCEPTS OF 56 The key concepts discussing 56 and beyond G wireless communications are: 1) Real wireless world with no more limitation with access and zone issues. ) Wearable devices with AY capabilities. 3) Internet protocol version 6(Pop), where a visiting care- of mobile IP address is assigned according to location and connected network. SECRET @ 2012 4) One unified global standard. 5) Pervasive networks providing ubiquitous computing: The user can simultaneously be connected to several wireless access technologies and seamlessly move between them These access technologies can be a 2. 56, 36, G or 56 mob ile networks, Wi-If, WPAD or any other future access technology.In 56, the concept may be further developed into multiple concurrent data transfer paths. 6) Cognitive radio technology, also known as smarted: allowing different radio technologies to share the same spectrum efficiently by adaptively ending unused spectrum and adapting the transmission scheme to the requirements of the technologies currently sharing the spectrum. This dynamic radio resource management is achieved in a distributed fashion, and relies on software defined radio. 7) High altitude stratospheric platform station (HAPS) systems.

Science a world of its own

Science, what does this word mean when you're a teacher or more importantly learning to be a teacher. Is it a dirty word? Or Just unfamiliar! Are we scared or Just unsure how to teach it? I will be looking at these thinking by current pre service teachers and graduate teachers. How do we gain confidence, belief and a good attitude towards teaching science in schools? Is it really that hard and daunting to teach 5 year olds and then again to 12 year olds. Is there any difference?Is there a way to help in making science a subject that is as important to a pre service teacher s Health & Physical Education or Art? â€Å"Science in Australian primary school is thus in a state of crisis† (Department of Employment & Training, 1989). Attitude towards teaching science at school is a major problem. Previous research has shown that elementary education majors often dislike science and lack confidence in their ability to teach it. This is an important problem because students who hold the se attitudes are likely to avoid teaching science, or teach it poorly, when they become teachers.It is therefore necessary to identify pre service elementary teachers who hold negative attitudes towards science, and attempt to convert these attitudes to positive before they become teachers. (David H. Palmer, 2001). Why is our attitude so dish-Jointed when it comes to science and to some extent mathematics too? Personally I can't remember much about doing science in primary school as it was too long ago. I feel that it was casual and fun but what I do remember doing was some exciting stuff in and around the school boundaries.Finding bugs, doing experiments and making erupting volcano's in year 6. But high school to me it started to be boring, not fun and an attitude â€Å"why do I have to go to Physics and Chemistry? Over the last two decades, a considerable amount of research attention has focused on the science attitudes of pre service elementary teachers. It has been found that m any of them hold negative attitudes which appear to have arisen from their past experiences in science, particularly at secondary level (Babel & Smith, 1994; Unloading & Wallace, 1996; Scamp, 1991; Westerners, 1982).The only good thing about science was Chemistry when you could play with chemicals and the Bunsen burners and melt things. I believe most pre service teachers think of this time in High School and make a Judgment. Within 3 seeks my attitude has started to change. With what I have seen and learnt, I am optimistic, a little excited on teaching science at primary school. What can change the attitude of the pre service teachers? There were three main reasons: personal attributes of the tutor, specific teaching strategies, and external validation.It was proposed that many of the individual factors were effective because they represented either â€Å"performance accomplishments† or â€Å"vicarious experience† as defined by Bandeau (Psychological Review, 84, 1977, 191-215). Do we as pre service teachers have enough knowledge and belief about science to infidelity teach it at school? Teaching practices are often considered as one of the reasons why American students are not currently demonstrating top achievement in science and mathematics. Both theory and common sense suggest that teachers ‘knowledge of subject matter necessarily influences their classroom practices.Linkages between teachers' personal knowledge, beliefs, and instructional activity have proven elusive despite the considerable level of concern expressed regarding low levels of mathematics and science knowledge possessed by pre and in service elementary teachers Leningrad, Putnam, Stein, & Baxter, 1991). Elementary teachers have been found to possess generally low level conceptual and factual knowledge as well as inadequate skills in the content area of science (Victor, 1962; Blower & Howe, 1969; Winner, 1993).General agreement exists that lack of such a background in sci ence knowledge significantly contributes to hesitancy and possible inability to deliver effective science instruction in classroom settings. Indeed, previous research in this area found that teachers gravitate toward performing those tasks in which they feel confident and competent (Cunningham & Blankness's. 979; Hone. 1976). Do I feel I have that belief and knowledge? I certainly don't have a full knowledge of what I need to be a competent science teacher, but be assured I'm excited to teach and be taught over the next couple of years.I certainly believe I can teach but gaining more knowledge would be an advantage. Maybe if science and mathematics subjects are more prevalent in undergraduate courses, than what it currently is around the country, it may be a subject that teachers will like to teach. As there continues to be a need for pre service teachers to bolster their understanding in these areas, this might well indicate a need for collaborative efforts between departments of s cience and mathematics and departments of education in devising ways in which higher education might better serve the needs of these entry- level teachers.Are we being taught enough in undergraduate teaching courses in the science subjects? Is more needed to alleviate the growing concern in this matter. A lot of studies have been conducted throughout the world, especially in western society. Not only pre service and graduate teachers had trouble teaching science but so did hose teaching for example grade 6. From what I have read many teachers believe that they need a more clear direction, a lack of materials and more information on suitable topics to be taught is needed. The general feeling was that teaching science involved considerable effort.This effort involved preparing a suitable topic and organizing the materials necessary to teach that topic. As well there seemed to be a lack of direction in the area of science. The feeling was that many teachers do not consider science to b e a high priority and hence were not willing to expend energy in organizing for it. A comparison was made between teaching science and social studies. The teachers suggested social studies was much easier to teach because the curriculum was well organized, the information was all together in one book and there were few materials needed.Science on the other hand required gathering ideas from a variety of books as well as a lot of materials for activities. Many of these materials were consumable and had to be replaced each year. One teacher suggested that ;there are some teachers who love science and are willing to put in the effort but the majority do not. There is no doubt that the use of a quality traduced program with supporting equipment and appropriate in servicing can help the primary teacher initiate worthwhile, sequenced science lessons on a regular basis.A study of 139 pre service teachers from the University college of Central Queensland by Ken Appleton concluded that there are general points about teaching science discipline knowledge in pre service and, by extrapolation, in service courses which can be learned from this study. Firstly, science discipline knowledge needs to be taught in a way which will give students a more positive self -image of themselves as teachers of science and technology.Teaching discipline knowledge without taking this goal into consideration may do more harm than good: ; students' self – perceptions may well remain largely negative, and may even become more negative. Secondly, the teaching strategies which have proved effective in generating positive changes in self-perception tend to be time consuming, and need to be conducted in small group settings rather than large lectures. This means that the amount of content â€Å"covered† would usually be less than; that delivered in large group lectures.That is, what is gained in students' self-confidence, is paid for by covering less intent. The small group teaching also means more expensive teaching compared to traditional lecture and laboratory methods. Thirdly, once students' self-confidence is improved, many could be expected to access science and technology content for themselves through individual research and/or normal science courses-? while not proven, this is a reasonable hypothesis given the changes documented in this study and others (Kirkwood, Berlin & Hardy, 1989).Ideally, a pre service course should there- fore contain at least two compulsory science and technology education units: he first based on strategies such as those outlined here, and the second a more specific focus on discipline knowledge. However, restrictions on the number of compulsory science education units able to be included in a pre-service course may make independent study the only viable means for many students to gain further science and technology discipline knowledge.I personally know that when I first ventured into being a teacher 7 years ago, I studied t o be a secondary PEE teacher. It was very science based, because you specialize in these subjects to teach at secondary. But primary school teaching is different you need a range of knowledge in al teaching disciplines from art, religion, JOSE, English, mathematics, IT and science to name a few. You never know when you need that knowledge even if you're a specialist teacher.If there is still such a lack of concern for competency in teaching science in primary education, maybe there should be extra training for graduate teachers either through a tertiary institution or during their first years as a teacher or even in the summer before they start teaching at a school and let's not forget about the current teachers either. Studies have shown that they still need updated knowledge in science subjects. Keeping this in mind the more extra-curricular learning a teacher can get the more confident they will be to teach science.This in turn will change their attitude and belief to teaching it and influence other pre service teachers wanting to move into the primary school teaching. Unfortunately teaching science at primary school level is still daunting to many pre service teachers. Having had bad experiences while at school themselves, this has contributed to pre service teachers not having enough practical and theory based knowledge, having little or no belief and confidence being low. Will science ever be a object that pre service teachers want to teach? Will it change over time?It has been known that a problem exists for decades but no one seems to have the answer to alleviate the problem. Many studies, surveys have been performed and implemented without success. What will the government of Australia do to fix this problem? With the change to a national curriculum, let's hope something will finally be done.

Gourmet Manufacturing Plant Manager Interview Essay Example

Gourmet Manufacturing Plant Manager Interview Essay Example Gourmet Manufacturing Plant Manager Interview Essay Gourmet Manufacturing Plant Manager Interview Essay THE UNIVERSITY OF FAISALABAD INDUSTRIAL TOUR TO GOURMET BEVERAGES MANUFACTURING PLANT. Plant Project Manager: Mr. Nassir Mahmoud. Faculty Members: Sir Waseem, Sir Shehzad. Student: Mohammad Nasir (0322-6679733) Mr. Nassir told the students the beverage plant covers about 30acres of total area. It is a prototype program and once the prototype is created it can be copied anywhere. The plant completion is still in progress and is expected to be completed within one year. All the workers are working hard and quick. Meanwhile, Mr. Nassir and his team make sure the work is done according to plan. The equipment’s that are used in the plant are manufactured by ‘Crones’ company, having the production capacity of water 25000/hour and juice 15000/ hour. Later he answered the questions of the students, which are as follows: WHY DID GOURMET LAUNCH ITSELF IN FAISALABAD AFTER THEIR SUCCESS IN LAHORE? Mr. Nassir Mahmoud answered that it was like a test to check what the response is if gourmet is brought out of Lahore and launched in another city. For this Faisalabad was decided because of the ease of access for all type of support for example motorway access, material can be brought within 2 hours of time and the other good reason is the culture of food taste of Lahore and Faisalabad is quiet similar. Currently 100% of products are manufactured here in Faisalabad. WHY DID GOURMET CHOOSE FAISALABAD FOR THEIR PLANT? It would give huge benefits to gourmet in the future like when the Multan motorway will be constructed it will benefit gourmet in reducing its expense if they plan to launch in gourmet there too. : One reason to choose fsd is that in future benefits are here, because of the ease in access to motorway. ARE THE GOURMET DRINKS DISTRIBUTED IN OTHER CITIES OF PAKISTAN? The gourmet Drinks are distributed allover Pakistan except not in Baluchistan etc. In Punjab almost all main cities are covered. Distribution is mostly given to the one who has more market exposure. FUTURE PRODUCTS OF GOURMET? Upcoming product of gourmet is juice. Moreover the glass bottles for gourmet cola would be introduced within 2 months. Juices would be in PET bottle, PET bottle is chosen as it has minimum chances of bacteria to be born in it and Cola will be in glass water, when the consumer returns the bottle back, gourmet will be able to save up to 17/18rs per bottle. GOURMET FUTURE PLANS FOR BRANCHES IN FAISALABAD? Production is a huge hassle reasonable branches would be there in any city gourmet shifts to. Gourmet would shift to longer shelf life. In Lahore it has 104 branches but the branches wouldnt be as many as in Lahore, currently Gourmet has 9 branches in Faisalabad and 10 or 12 more branches would be launched. So the total number of branches would probably be 20 or might exceed 20. IS THERE ANY NEED OF HOME DELIVERY SERVICE OF GOURMET PRODUCTS IN FAISALABAD? Gourmet doesn’t Emphasis on it. Branches are near to you, they bring branches to your home. Gourmet produces too many products, probably 1700, they are factory produced are kept in the branch, home delivery service suits more on restaurants or fast good places like pizza, kfc etc. , HOW DO YOU SEE DAUSAY AS A COMPETITOR OF GOURMET IN LAHORE? Competition is always positive for consumer owner. For consumer in a sense that theyll have better quality in future. Dausay would have affected the sales of gourmet in Lahore. It increases the competition and now gourmet will focus to make improve its products and reduce price and make even better presentation. Gourmet rates are still better. We make quality products, and it’s 100% sure says Mr. Nassir. One should have trust in Allah, even if 100 companies come for competition in the market, rizk is written, we will have it anyway. NIRALA HAS ORDERING ONLINE DELIVERY, WHY NOT GOURMET? Nirala has less branches, we have many, the branches are at your home, delivery is not really required, for that packaging must be different, and many other things, a new industry would have to be developed in order to make such a packaging that could be taken out of country. WHY DOESNT GOURMET ADVERTISE AS MUCH AS PEPSI COKE? Gourmet doesnt want to spend on advertisement. Gourmet cola is the reason why Pepsi brought its price down; Gourmet still sells its cola in bare minimum margin this doesnt allow them to spend on advertisement. They leave the advertise expense to the consumer and don’t waste it on advertisement i. e. spending on the dancers and the other models for the advertisement. Gourmet has direct link to the customer, Pepsi coke doesnt have the link direct to its consumers, there is a number on every gourmet bottle any customer can call and contact gourmet. WHY COKE IS SOLD ON GOURMET? Gourmet is the biggest seller of coca cola. They have a preferential trade agreement with coca cola, reason why gourmet didn’t choose Pepsi is because they believe coca cola has better quality and Pepsi is produced in Pak. TURNOVER IS TOO MUCH? Basic salesmen have such turnover anywhere in the world. Basic salesman is not a profession, any person who doesnt get a good job works as a basic salesman. Any of them who get a better job somewhere else he quickly shifts. This is not a long-term profession. Gourmet is highlighted this much because they have a huge setup, this is happening everywhere but they aren’t highlighted as they have small setup. Mr. Nassir believes the retention has been reduced after the introducing the software. DOUSAY HAS GOURMET EMPLOYEEs, WHY? Fact is that half of them come back to gourmet. Dousay has 100% our ex-employees. Because they need experienced trained employees. INCENTIVES FOR MOTIVATION OF EMPLOYEES: Work has no link to cash. Work is linked to commitment. Gourmet gives 3 time food to its employees other than his salary. They are sure that each and every rack is safe right now; it is because if racks inventory is reduced the amount is deducted from his pay if he keeps it safe hes given 50rs as reward, this concept is introduced by Mr. Nassir it has reduced the theft in the branches. Moreover when employee puts right inventory, hes given a share of profit, i. e. 100rs/day. HOW DO THE OWNERS STAY IN TOUCH WITH ALL KIND OF NECESSARY INFORMATION? Gourmet has their own software designers, within few months the ERP software would be developed. This is for the ease of the owners they can access the data anywhere. In Faisalabad, every gourmet branch is linked to the main. Data flows all the time to the head office. All reporting regarding expense, purchases, salaries, sales etc. re reported live. This live reporting is done only is Faisalabad because in Lahore the owners themselves sit and run. THE GOOD ADVICE TO STUDENTS: Keep money on your back not in front of you, if you do this money will come behind you, if you keep it in front of yourself you will never catch it, if you keep it behind you, it will come running behind you. Mr. Nassir gives an open challenge to anyone, offer any managerial employees to leave gourmet and shift to some other bakery, the employee won’t!

Embryonic Stem Cells Are the Key to Cures essays

Embryonic Stem Cells Are the Key to Cures essays Thousands of Americans face trouble doing regular work around the house. Most of them have difficulties using scissors, can no longer do extracurricular activities, and have to take several expensive prescription medications just to ease the uncontrollable tremors in their muscles. These people have Parkinson's disease. This incurable disease causes the degenerate of the central nervous system and is characterized by impaired muscular coordination. If embryonic stem cell research were federally funded then scientist could find a cure for Parkinson's disease. The only alternative for thousands of Americans is to take expensive prescriptions, which have more side effects than benefits, and usually have problems paying for the drugs (Devitt). Another case would be the several millions of people who need a certain organ to survive. For example, there are several kidney transplants needed, but not enough donors to provide them with a kidney that matches those in need of a transplant. This results in many of them being placed on a long waiting list with little hope in ever getting a transplant. Unfortunately, embryonic stem cells are the center of controversy for several religious, medical, ethical, and moral reasons. If these issues are not put aside then millions of people will die from Parkinson's disease and several will not get the organ(s) needed to survive in the future. Scientists should be able to research embryonic stem cells for finding cures without having a backlash against the scientists (Devitt). A stem cell is a cell that can replicate itself and function as a particular a cell in the body. There are several different kinds of stem cells, but the most controversial is the embryonic stem cell. The embryonic stem cell is created by fertilization in a Petri dish. Then, some of the embryonic stem cells are placed back into the woman and the rest are thr...

Why Arguments Against Free Trade Are Flawed

Why Arguments Against Free Trade Are Flawed Economists conclude, under some simple assumptions, that allowing free trade in an economy improves welfare for society overall. If free trade opens up a market to imports, then consumers benefit from the low-priced imports more than producers are hurt by them. If free trade opens up a market for exports, then producers benefit from the new place to sell more than consumers are hurt by higher prices. Nonetheless, there are a number of common arguments made against the principle of free trade. Lets go through each of them in turn and discuss their validity and applicability. The Jobs Argument One of the main arguments against free trade is that, when trade introduces lower cost international competitors, it puts domestic producers out of business. While this argument isnt technically incorrect, it is short-sighted. When looking at the free trade issue more broadly, on the other hand, it becomes clear that there are two other important considerations. First, the loss of domestic jobs is coupled with reductions in prices of goods that consumers buy, and these benefits shouldnt be ignored when weighing the tradeoffs involved in protecting domestic production versus free trade. Second, free trade not only reduces jobs in some industries, but it also creates jobs in other industries. This dynamic occurs both because there are usually industries where the domestic producers end up being exporters (which increases employment) and because the increased income held by foreigners who benefited from free trade is at least partly used to buy domestic goods, which also increases employment. The National Security Argument Another common argument against free trade is that it is risky to depend on potentially hostile countries for vital goods and services. Under this argument, certain industries should be protected in the interests of national security. While this argument is also not technically incorrect, it is often applied much more broadly than it should be in order to preserve the interests of producers and special interests at the expense of consumers. The Infant-Industry Argument In some industries, pretty significant learning curves exist such that production efficiency increases rapidly as a company stays in business longer and gets better at what it is doing. In these cases, companies often lobby for temporary protection from international competition so that they can have a chance to catch up and be competitive. Theoretically, these companies should be willing to incur short-term losses if the long-term gains are substantial enough, and thus shouldnt need assistance from the government. In some cases, however, companies are liquidity constrained enough that it cant weather the short-term losses, but, in those cases, it makes more sense for governments to provide liquidity via loans than to provide trade protection. The Strategic-Protection Argument Some proponents of trade restrictions argue that the threat of  tariffs, quotas, and the like can be used as a bargaining chip in international negotiations. In reality, this is often a risky and unproductive strategy, largely because threatening to take action that is not in a nations best interest is often viewed as a non-credible threat. The Unfair-Competition Argument People often like to point out that its not fair to allow competition from other nations because other countries dont necessarily play by the same rules, have the same costs of production, and so on. These people are correct in that its not fair, but what they dont realize is that the lack of fairness actually helps them rather than hurts them. Logically, if another country is taking actions to keep its prices low, domestic consumers benefit from the existence of low-priced imports. Granted, this competition can put some domestic producers out of business, but its important to remember that consumers benefit more than producers lose in exactly the same way as when other countries are playing fair but happen to be able to produce at lower cost anyway. In summary, the typical arguments made against free trade are generally not convincing enough to outweigh the benefits of free trade except in very particular circumstances.

Extended Schools in UK Essay Example | Topics and Well Written Essays - 4000 words

Extended Schools in UK - Essay Example It has thus a host of multifarious activities to perform as a 'cornerstone' of the emerging 'knowledge economy' and the 'hub' of the community life. In this essay we explore the theory and practice of, and the issues around, extended schooling. The discussion would be more meaningful against the background of the history of the concept of 'extended school' and its implementation. We, therefore, turn first to a short 'review of the literature' on extended school in the following section. The scheme of extended schooling first appeared as a 'full-service schooling' initiative in the United States and has been functioning there as part of the school system for a number of years. Some of these services have included the provision of welfare amenities of health and cleanliness, support services in the form of school counsellors, and various sports and youth activities. However, the recent interest in 'full-service' schooling has its origins in the remedial or ameliorative concerns, which appear to have been basically transplanted into the extended schools in England. The focus has been on the provision of health and social care services. The new community schools in Scotland (1999) was said to have been the first major implementation of the 'extended school' scheme in the UK. In Wales, the idea of community-focused schools has been used to investigate the need and feasibility of a similar provision. However, the idea of providing different services on school premises is hardly new (Walker et al., 2000; Tett, 2000; Raham, 1998, 2000; Smith, 2001). Since the nineteenth century there have been various examples of schools offering medical and welfare services alongside their traditional activities of teaching. Dryfoos has argued that the original model was that of the school-based health and social services centre where services were brought in by outside agencies in concurrence with school personnel ( Dryfoos,1994, p.142). They were to be 'one stop, collaborative institutions' (ibid, p.13). As to what elements should now be present in the concept, Dryfoos seems to be of the view that such a service package should include both 'quality education' and 'support services' (1994. p.13). The underlying principle behind the concept of the full-service or extended school is based on the recognition that schooling, for many, would become meaningful only when 'a range of welfare and health services were in place' along with quality teaching (Smith, 2001a). Soc ial disadvantage must be addressed in order to effectively tackle educational underachievement (Olasov and Petrillo, 1994; Carlson et al., 1995; Raham, 1998; Smith, 2001). Dryfoos (1993) has noted that the impetus for the development of the full-service school approach emanated from the recognition that the schools were often unable to cope adequately with individual student needs in areas such as the social, health, emotional and cultural requirements of their pupils. Hence, much of the literature is based on the premise that 'schools cannot do it alone' in the light of the multiple challenges they, and their students, families and communities face (Dryfoos, 1994,). Schools in UK have to cope with problems

Employment Relations Essay Example | Topics and Well Written Essays - 2500 words

Employment Relations - Essay Example References are also given about different stages of employment relations starting from the beginning of the industrial revolution which resulted in mass production and mass employment. It is also why labour pressed for living wages and why labour movements at different times are connected to the living wage (Blanchflower et al., 2007). Literature review for the paper was written by taking into consideration both hypothetical and practical aspects of the manner in which living wage is connected to the labour movement and why labour started the movement to be paid a living wage. Research for a living wage is quite a debatable area, and there are many different theories regarding the inception and implementation for a living wage. The review examines a few theoretical aspects and then reviews empirical evidence of some contemporary findings. Analysis of the literature suggests that the issue raised is pragmatic which must consider the framework of negative or positive domestic local factors that contribute to the overall analysis of current and past relationships between employers and employees. Conceptual issues involved were reviews which included the progression of employment relations since labour started demanding a living wage. Nevertheless, the purpose of the review is to evaluate the available evidence to reach a coherent conclusion about relevant viewpoints of employment relations. The demand for minimum wages depends upon different factors such as the overall demand for labour, skill required for the job and the cost incurred by the employer for the product. The most difficult aspect of this is calculating wages considering outside influences. Literature for the different aspects of individual and collective bargaining, including various steps taken to improve the relationship have been discussed in this paper (Coats,

Learning to read and write Essay Example | Topics and Well Written Essays - 500 words

Learning to read and write - Essay Example The desire to read and learn how to write was also a primary factor in Douglass’s life. His whole life in Master Hugh’s family was spent conflicting with anyone who stood in the path of his desire to read and write. As a matter of fact, Douglass knew the effects of learning to read and write after seeing the changes in his mistress’s actions. The mistress changed from the tender-hearted, pious woman into a tiger-like fierce person who was more violent in her oppositions to the slaves than her husband (Douglas 1). The stories by Rodriguez and Douglass illustrate that education and the ability to learn and write were the only measures as stressed by the people around them to improve their lives. The world viewed education as the primary factor that could change the life of an individual. The master in Douglass’s case opposed the desire to educate the slaves and influenced the wife to do the same because they never considered it efficient to train a slave. Through education, the slaves would develop a sense of worthiness that would be damaging to the masters. The masters knew the power of learning to read and write and the consequences they would face had the slaves managed to do so. Douglas seemed to have a strong affinity to books and preferred facing the consequences than avoiding reading a book. He seemed to have an idea that books would be the key to his salvation. However, Douglas and Rodriguez failed to understand the adverse effects their actions would cause to their life. They failed to realise that there are two sides to every coin and that what has the power to make one free had the ability to blind and destroy them. Reading and writing abilities seemed to be the key to their success. However, soon after achieving their desires, they realized that they had achieved totally different results from what they expected. Douglas realized that he had been dreaming for most of his life and the ability to not understand the

Tv show critque Assignment Example | Topics and Well Written Essays - 250 words

Tv show critque - Assignment Example First and foremost, it is evident that the intention of feministic television was good at the first instant, however, over the years they have been used by women to levy attacks on men. On the same point, feministic television shows have at time come in between people marriages. Apparently, since they support strong women values, they judgement towards men has been biased thus have affected men negatively. Furthermore, due to this bias in judgement men values and right have been undermined with the sole intention of championing the woman’s interest. In summation, feministic television shows are good if they promote fair judgement as opposed to gender discrimination. Therefore, it is mandatory to observe this crucial factor and the feminism will be promoted to the highest levels using television and other communication devices as their medium of sharing ideas. To this end, feminist television shows need to observe gender equality or face abolition since they should consider the male species as an equal as opposed to an

An analysis of the LensCrafter s Term Paper Example | Topics and Well Written Essays - 1500 words

An analysis of the LensCrafter s - Term Paper Example This paper will specifically discuss LensCrafters’ operations management, value chain, and service-delivery system design. Calloway (2009), while analysing the operations strategy of LensCrafters finds that the organisation pays particular attention to improving customer loyalty through delivering legendary customer service (p.35). As market analysts point out, the firm strives to deliver superior overall value for meeting individual needs of each customer. The on-site production of perfect quality eyewear appears to be the major highlight of the firm’s customer service. This facility is really assistable for customers to save considerable amount of their time and hence to enjoy a convenient shopping experience. Undoubtedly, this innovative customer practice would assist the organisation to effectively confront with the stiff market competition in the modern optical market. In other words, improved shopping experience and enhanced customer loyalty can aid the organisati on to gain a competitive advantage in terms of sustainability. It is also identified that LensCrafters emphasises developing associates and leaders in the global marketplace with intent to strengthen its market position and to address competition pressures successfully. In addition, this operational strategy is also beneficial for the company to cut down its operating costs and to improve its profitability. The organization employs a differentiation strategy to promote brand recognition and remain to be unique in the optical market. Consumer behaviour studies and other market research analyses indicate that the firm’s differentiation strategy has assisted it to make its products familiar to customers and thereby influence their purchase decisions. Market studies also reveal that the organization’s distinct business strategy is really appealable to customer groups who consider time as the paramount factor. In addition, the company has developed a well shaped diversifica tion strategy in order to make a wide variety of eye care products and services available in once place. Despite relatively huge initial investments, the idea of maintaining production laboratories in stores has greatly benefited the company to ensure perfect product/service quality and hence to focus on individual specifications of each customer. LensCrafters has developed a pay later program in order to make its services affordable to all. In addition, currently LensCrafters offers one of the improved extended protection plans in the market. Finally, the company performs outstandingly in terms of customer relationship management and it benefits the firm to retain existing customer and to attract new potential customer groups. The LensCrafters’ operations management activities notably enhance the customer experience. The firm has integrated its manufacturing process into the service facility so as to rapidly respond to customer needs. In the optical industry, it is unusual f or customers to get their eyeglasses delivered ‘in about an hour’ and therefore this facility extremely adds value to customer shopping experience. It is to be also noted that the company has a technologically advanced lab facility to ensure that the eyewear products delivered are of superior quality. The organisation has a well developed and integrated service delivery system and has a very attractive physical layout. When a customer

Sales Role Play Report Term Paper Example | Topics and Well Written Essays - 1000 words

Sales Role Play Report - Term Paper Example The company values the importance of proper storage facilities for herbal products. Therefore there exists a spacious warehouse with required temperature conditions. The corporate office and the manufacturing facility of the company are situated in Philadelphia. Healthy Hair professionals are backed by rich industry experience, exposure as well in depth knowledge makes. Factors such as thorough quality checking, sophisticated infrastructure, skilful team of professionals, timely delivery, customized solution and the ease of payment modes makes the company the most sought after herbal product manufacturers. Natural Hair Care accelerates the growth of hair. It provides strength to the hair, prevents hair fall and dandruff. It also tends to have a cooling effect on the eyes and reduces headache. Natural Hair Care is n excellent herbal hair oil that can be used as ordinary hair oil also. Natural Hair Care contains pure herbs and coconut oil. This is a one of its kind and acknowledged by those who used the product sample. Whole Foods Market is a retail supermarket chain located in Austin, Texas. The company is famous for providing natural and organic food product of greatest quality. The company maintains strict guidelines and quality standards. Whole Foods market is best known for the unshakable commitment for sustainable agriculture. The company was founded by John Mackey and Renee Lawson Hardy. Since the humble beginning in 1980 the company has come a long way as there are over three hundred outlets in North America and UK. The company food department can be classified in to beer, bakery, bulk, cheese, Coffee and tea, Floral, grocery, prepared foods, seafood, wine, whole body. Whole Foods Market is the market leader in the organic food business. However the company now seeks for diversification. But the company wishes to do so by keeping their core commitment towards agriculture and

An analysis of the LensCrafter s Term Paper Example | Topics and Well Written Essays - 1500 words

An analysis of the LensCrafter s - Term Paper Example This paper will specifically discuss LensCrafters’ operations management, value chain, and service-delivery system design. Calloway (2009), while analysing the operations strategy of LensCrafters finds that the organisation pays particular attention to improving customer loyalty through delivering legendary customer service (p.35). As market analysts point out, the firm strives to deliver superior overall value for meeting individual needs of each customer. The on-site production of perfect quality eyewear appears to be the major highlight of the firm’s customer service. This facility is really assistable for customers to save considerable amount of their time and hence to enjoy a convenient shopping experience. Undoubtedly, this innovative customer practice would assist the organisation to effectively confront with the stiff market competition in the modern optical market. In other words, improved shopping experience and enhanced customer loyalty can aid the organisati on to gain a competitive advantage in terms of sustainability. It is also identified that LensCrafters emphasises developing associates and leaders in the global marketplace with intent to strengthen its market position and to address competition pressures successfully. In addition, this operational strategy is also beneficial for the company to cut down its operating costs and to improve its profitability. The organization employs a differentiation strategy to promote brand recognition and remain to be unique in the optical market. Consumer behaviour studies and other market research analyses indicate that the firm’s differentiation strategy has assisted it to make its products familiar to customers and thereby influence their purchase decisions. Market studies also reveal that the organization’s distinct business strategy is really appealable to customer groups who consider time as the paramount factor. In addition, the company has developed a well shaped diversifica tion strategy in order to make a wide variety of eye care products and services available in once place. Despite relatively huge initial investments, the idea of maintaining production laboratories in stores has greatly benefited the company to ensure perfect product/service quality and hence to focus on individual specifications of each customer. LensCrafters has developed a pay later program in order to make its services affordable to all. In addition, currently LensCrafters offers one of the improved extended protection plans in the market. Finally, the company performs outstandingly in terms of customer relationship management and it benefits the firm to retain existing customer and to attract new potential customer groups. The LensCrafters’ operations management activities notably enhance the customer experience. The firm has integrated its manufacturing process into the service facility so as to rapidly respond to customer needs. In the optical industry, it is unusual f or customers to get their eyeglasses delivered ‘in about an hour’ and therefore this facility extremely adds value to customer shopping experience. It is to be also noted that the company has a technologically advanced lab facility to ensure that the eyewear products delivered are of superior quality. The organisation has a well developed and integrated service delivery system and has a very attractive physical layout. When a customer

Current Research Essay Example | Topics and Well Written Essays - 1000 words

Current Research - Essay Example Through the use of software, development in different dimensions and especially economically is achieved. However, this is achieved through the concentration of multiple locations which allow important developments. Through software development, complex projects in the world are managed through dedicated methodologies and standards (Galina & Smite, 2011, p.8). The increasing competition of companies across the world has increased the need for presentation of services and goods of high quality. Through software distribution, there is enhanced process thinking which enables entrusting work to skilled individuals (Oshri, Kotlarsky & Willcocks, 2007, p.28). This makes it possible for companies to respond appropriately to changing customer’s needs. When companies are able to distribute their development globally, they benefit from getting relatively cheap resources which lower their operational costs. Software development ensures that there is reduced reliance on heavy documents of standardized models. Software development further ensures that there is easier communication between members of team projects which makes it possible to share ideas (Setamanit, et al. 2007, p.18). In this paper, importance of global software development will be discussed. Distributed software stresses the correlation between qualities of services to the society and quality processes. Distributed software ensures that the needs of the customers get matching responses from different organization (Galvina & Nsmite, 2011, p.10). This is in addition to preventing increased incidences of duplicated work. There has been progressive development of process models related to software development. Software development is characterized by organization of resources to meet the desires of people. This is in addition to meeting their expectation timely. Distributed software development though complex; offers solutions to emerging challenges in the world (Jaakkola, 2009, p.71). Through

The field of nuclear physics

The field of nuclear physics Nuclear physics is the field of physics that studies the building blocks and interactions of atomic nuclei. The most commonly known applications of nuclear physics are nuclear power and nuclear weapons, but the research has provided wider applications, including those in medicine (nuclear medicine, magnetic resonance imaging), materials engineering (ion implantation) and archaeology (radiocarbon dating). The field of particle physics evolved out of nuclear physics and, for this reason, has been included under the same term in earlier times. The discovery of the electron by J. J. Thomson was the first indication that the atom had internal structure. At the turn of the 20th century the accepted model of the atom was J. J. Thomsons plum pudding model in which the atom was a large positively charged ball with small negatively charged electrons embedded inside of it. By the turn of the century physicists had also discovered three types of radiation coming from atoms, which they named alpha, beta, and gamma radiation. Experiments in 1911 by Lise Meitner and Otto Hahn, and by James Chadwick in 1914 discovered that the beta decay spectrum was continuous rather than discrete. That is, electrons were ejected from the atom with a range of energies, rather than the discrete amounts of energies that were observed in gamma and alpha decays. This was a problem for nuclear physics at the time, because it indicated that energy was not conserved in these decays. In 1905, Albert Einstein formulated the idea of mass?energy equivalence. While the work on radioactivity by Becquerel, Pierre and Marie Curie predates this, an explanation of the source of the energy of radioactivity would have to wait for the discovery that the nucleus itself was composed of smaller constituents, the nucleons. Rutherfords team discovers the nucleus In 1907 Ernest Rutherford published Radiation of the a Particle from Radium in passing through Matter[1]. Geiger expanded on this work in a communication to the Royal Society[2] with experiments he and Rutherford had done passing a particles through air, aluminum foil and gold leaf. More work was published in 1909 by Geiger and Marsden[3] and further greatly expanded work was published in 1910 by Geiger,[4] In 1911-2 Rutherford went before the Royal Society to explain the experiments and propound the new theory of the atomic nucleus as we now understand it. The key experiment behind this announcement happened in 1909 as Ernest Rutherfords team performed a remarkable experiment in which Hans Geiger and Ernest Marsden under his supervision fired alpha particles (helium nuclei) at a thin film of gold foil. The plum pudding model predicted that the alpha particles should come out of the foil with their trajectories being at most slightly bent. Rutherford had the idea to instruct his team to look for something that shocked him to actually observe: a few particles were scattered through large angles, even completely backwards, in some cases. He likened it to firing a bullet at tissue paper and having it bounce off. The discovery, beginning with Rutherfords analysis of the data in 1911, eventually led to the Rutherford model of the atom, in which the atom has a very small, very dense nucleus containing most of its mass, and consisting of heavy positively charged particles with embedded electrons in order to balance out the charge (since the ne utron was unknown). As an example, in this model (which is not the modern one) nitrogen-14 consisted of a nucleus with 14 protons and 7 electrons (21 total particles), and the nucleus was surrounded by 7 more orbiting electrons. The Rutherford model worked quite well until studies of nuclear spin were carried out by Franco Rasetti at the California Institute of Technology in 1929. By 1925 it was known that protons and electrons had a spin of 1/2, and in the Rutherford model of nitrogen-14, 20 of the total 21 nuclear particles should have paired up to cancel each others spin, and the final odd particle should have left the nucleus with a net spin of 1/2. Rasetti discovered, however, that nitrogen-14 has a spin of 1. James Chadwick discovers the neutron In 1932 Chadwick realized that radiation that had been observed by Walther Bothe, Herbert L. Becker, Ir?ne and Fr?d?ric Joliot-Curie was actually due to a neutral particle of about the same mass as the proton, that he called the neutron (following a suggestion about the need for such a particle, by Rutherford). In the same year Dmitri Ivanenko suggested that neutrons were in fact spin 1/2 particles and that the nucleus contained neutrons to explain the mass not due to protons, and that there were no electrons in the nucleus only protons and neutrons. The neutron spin immediately solved the problem of the spin of nitrogen-14, as the one unpaired proton and one unpaired neutron in this model, each contribute a spin of 1/2 in the same direction, for a final total spin of 1. With the discovery of the neutron, scientists at last could calculate what fraction of binding energy each nucleus had, from comparing the nuclear mass with that of the protons and neutrons which composed it. Differences between nuclear masses calculated in this way, and when nuclear reactions were measured, were found to agree with Einsteins calculation of the equivalence of mass and energy to high accuracy (within 1% as of in 1934). Yukawas meson postulated to bind nuclei In 1935 Hideki Yukawa proposed the first significant theory of the strong force to explain how the nucleus holds together. In the Yukawa interaction a virtual particle, later called a meson, mediated a force between all nucleons, including protons and neutrons. This force explained why nuclei did not disintegrate under the influence of proton repulsion, and it also gave an explanation of why the attractive strong force had a more limited range than the electromagnetic repulsion between protons. Later, the discovery of the pi meson showed it to have the properties of Yukawas particle. With Yukawas papers, the modern model of the atom was complete. The center of the atom contains a tight ball of neutrons and protons, which is held together by the strong nuclear force, unless it is too large. Unstable nuclei may undergo alpha decay, in which they emit an energetic helium nucleus, or beta decay, in which they eject an electron (or positron). After one of these decays the resultant nucleus may be left in an excited state, and in this case it decays to its ground state by emitting high energy photons (gamma decay). The study of the strong and weak nuclear forces (the latter explained by Enrico Fermi via Fermis interaction in 1934) led physicists to collide nuclei and electrons at ever higher energies. This research became the science of particle physics, the crown jewel of which is the standard model of particle physics which unifies the strong, weak, and electromagnetic forces. Modern nuclear physics Main articles: Liquid-drop model and Shell model A heavy nucleus can contain hundreds of nucleons which means that with some approximation it can be treated as a classical system, rather than a quantum-mechanical one. In the resulting liquid-drop model, the nucleus has an energy which arises partly from surface tension and partly from electrical repulsion of the protons. The liquid-drop model is able to reproduce many features of nuclei, including the general trend of binding energy with respect to mass number, as well as the phenomenon of nuclear fission. Superimposed on this classical picture, however, are quantum-mechanical effects, which can be described using the nuclear shell model, developed in large part by Maria Goeppert-Mayer. Nuclei with certain numbers of neutrons and protons (the magic numbers 2, 8, 20, 50, 82, 126, ) are particularly stable, because their shells are filled. Other more complicated models for the nucleus have also been proposed, such as the interacting boson model, in which pairs of neutrons and protons interact as bosons, analogously to Cooper pairs of electrons. Much of current research in nuclear physics relates to the study of nuclei under extreme conditions such as high spin and excitation energy. Nuclei may also have extreme shapes (similar to that of Rugby balls) or extreme neutron-to-proton ratios. Experimenters can create such nuclei using artificially induced fusion or nucleon transfer reactions, employing ion beams from an accelerator. Beams with even higher energies can be used to create nuclei at very high temperatures, and there are signs that these experiments have produced a phase transition from normal nuclear matter to a new state, the quark-gluon plasma, in which the quarks mingle with one another, rather than being segregated in triplets as they are in neutrons and protons. Modern topics in nuclear physics Spontaneous changes from one nuclide to another: nuclear decay Main article: Radioactivity There are 80 elements which have at least one stable isotope (defined as isotopes never observed to decay), and in total there are about 256 such stable isotopes. However, there are thousands more well-characterized isotopes which are unstable. These radioisotopes may be unstable and decay in all timescales ranging from fractions of a second to weeks, years, or many billions of years. For example, if a nucleus has too few or too many neutrons it may be unstable, and will decay after some period of time. For example, in a process called beta decay a nitrogen-16 atom (7 protons, 9 neutrons) is converted to an oxygen-16 atom (8 protons, 8 neutrons) within a few seconds of being created. In this decay a neutron in the nitrogen nucleus is turned into a proton and an electron and antineutrino, by the weak nuclear force. The element is transmuted to another element in the process, because while it previously had seven protons (which makes it nitrogen) it now has eight (which makes it oxygen). In alpha decay the radioactive element decays by emitting a helium nucleus (2 protons and 2 neutrons), giving another element, plus helium-4. In many cases this process continues through several steps of this kind, including other types of decays, until a stable element is formed. In gamma decay, a nucleus decays from an excited state into a lower state by emitting a gamma ray. It is then stable. The element is not changed in the process. Other more exotic decays are possible (see the main article). For example, in internal conversion decay, the energy from an excited nucleus may be used to eject one of the inner orbital electrons from the atom, in a process which produces high speed electrons, but is not beta decay, and (unlike beta decay) does not transmute one element to another. Nuclear fusion Main article: Nuclear fusion When two low mass nuclei come into very close contact with each other it is possible for the strong force to fuse the two together. It takes a great deal of energy to push the nuclei close enough together for the strong or nuclear forces to have an effect, so the process of nuclear fusion can only take place at very high temperatures or high densities. Once the nuclei are close enough together the strong force overcomes their electromagnetic repulsion and squishes them into a new nucleus. A very large amount of energy is released when light nuclei fuse together because the binding energy per nucleon increases with mass number up until nickel-62. Stars like our sun are powered by the fusion of four protons into a helium nucleus, two positrons, and two neutrinos. The uncontrolled fusion of hydrogen into helium is known as thermonuclear runaway. Research to find an economically viable method of using energy from a controlled fusion reaction is currently being undertaken by various resea rch establishments (see JET and ITER). For nuclei heavier than nickel-62 the binding energy per nucleon decreases with the mass number. It is therefore possible for energy to be released if a heavy nucleus breaks apart into two lighter ones. This splitting of atoms is known as nuclear fission. The process of alpha decay may be thought of as a special type of spontaneous nuclear fission. This process produces a highly asymmetrical fission because the four particles which make up the alpha particle are especially tightly bound to each other, making production of this nucleus in fission particularly likely. For certain of the heaviest nuclei which produce neutrons on fission, and which also easily absorb neutrons to initiate fission, a self-igniting type of neutron-initiated fission can be obtained, in a so-called chain reaction. (Chain reactions were known in chemistry before physics, and in fact many familiar processes like fires and chemical explosions are chemical chain reactions.) The fission or nuclear chain-reaction, using fission-produced neutrons, is the source of energy for nuclear power plants and fission type nuclear bombs such as the two that the United States used against Hiroshima and Nagasaki at the end of World War II. Heavy nuclei such as uranium and thorium may undergo spontaneous fission, but they are much more likely to undergo decay by alpha decay. For a neutron-initiated chain-reaction to occur, there must be a critical mass of the element present in a certain space under certain conditions (these conditions slow and conserve neutrons for the reactions). There is one known example of a natural nuclear fission reactor, which was active in two regions of Oklo, Gabon, Africa, over 1.5 billion years ago. Measurements of natural neutrino emission have demonstrated that around half of the heat emanating from the Earths core results from radioactive decay. However, it is not known if any of this results from fission chain-reactions. Production of heavy elements According to the theory, as the Universe cooled after the big bang it eventually became possible for particles as we know them to exist. The most common particles created in the big bang which are still easily observable to us today were protons (hydrogen) and electrons (in equal numbers). Some heavier elements were created as the protons collided with each other, but most of the heavy elements we see today were created inside of stars during a series of fusion stages, such as the proton-proton chain, the CNO cycle and the triple-alpha process. Progressively heavier elements are created during the evolution of a star. Since the binding energy per nucleon peaks around iron, energy is only released in fusion processes occurring below this point. Since the creation of heavier nuclei by fusion costs energy, nature resorts to the process of neutron capture. Neutrons (due to their lack of charge) are readily absorbed by a nucleus. The heavy elements are created by either a slow neutron cap ture process (the so-called s process) or by the rapid, or r process. The s process occurs in thermally pulsing stars (called AGB, or asymptotic giant branch stars) and takes hundreds to thousands of years to reach the heaviest elements of lead and bismuth. The r process is thought to occur in supernova explosions because the conditions of high temperature, high neutron flux and ejected matter are present. These stellar conditions make the successive neutron captures very fast, involving very neutron-rich species which then beta-decay to heavier elements, especially at the so-called waiting points that correspond to more stable nuclides with closed neutron shells (magic numbers). The r process duration is typically in the range of a few seconds.

Gays in the Military Essay -- Homosexual Gay Lesbian

For nearly 50 years, it has been the U.S. military's official policy to exclude homosexuals from service. In November 1992, President - elect Clinton told Americans that he planned to lift the military's long - standing ban on gays and lesbians. Homosexual men and women, he said, should not be prevented from serving their country based on their sexual orientation. Soon after taking office in 1993, Clinton faced powerful military and congressional opposition to lifting the ban. General Colin Powell, then - chairman of the Joint Chiefs of Staff, and Senator Sam Nunn, who was chairman of the Senate Armed Forces Committee between 1987 an 1994 and left Congress in 1996, announced that they would seek to block his attempts to lift the ban. For the next six months, debate raged over what to do about the military's ban on gays and lesbians. Clinton's liberal supporters wanted him to follow through on his promise to lift the ban, urging the need to end discrimination against gays and lesbians. Conservatives, military leaders and some lawmakers of both parties argued that the presence of declared homosexuals in the armed forces would be detrimental to military readiness. They said that letting gays and lesbians serve would destroy all morale and erode good discipline and order. Ban opponents maintained that gay people were capable men and women who should be allowed to serve their county.   Ã‚  Ã‚  Ã‚  Ã‚   In July 1993, a compromise policy was struck between supporters and opponents of the ban. The compromise, known as "don't ask, don't tell," allowed gays and lesbians to serve in the military as long as they did not proclaim their homosexuality or engage in Homosexual conduct. Under the policy, military commanders would not try to find out the sexual orientation of the personnel, and gay and lesbian personnel would not disclose their sexual orientation. The policy marked a change from past practice in that simply being homosexual was no longer a disqualifier for military service. Conservatives saw the change as a regrettable relaxation of the absolute ban on gay people. Liberals were dissatisfied because the new policy still allowed the military to oust gays and lesbians if they revealed their orientation.   Ã‚  Ã‚  Ã‚  Ã‚   While some liberals disagree with the policy, arguing that it punishes gays and lesbians for engaging in the same kinds of behavior that heterosexuals are fre... ...for the rest of society. If the federal government itself discriminates against gay people, they say, that sends a powerful message to other employers and to society at large Conclusion   Ã‚  Ã‚  Ã‚  Ã‚  I've discovered in doing this report that some opposition to gay people's military service is based on moral concerns. I feel that many people believe that homosexuality is wrong and do not want the federal government to appear to condone it by allowing gays and lesbians to serve openly. Some observers point out that gay people have not yet been fully accepted and integrated into society at large. They say that asking the military to accept gays and lesbians is simply asking too much. Reference: †¢Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Issues and Controversies: Gays in the military, Facts on File News Service(1999), Retrieved from : http://www.facts.com/icof/i00062.htm †¢Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Robinson, B.A. Gays in the military; â€Å"Don’t ask†, Don’t Tell†, (2000) Retrieved from: http://www.religioustolerance.org/hom_mili.htm †¢Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Steffan, Joseph; Gays in the Military; Joseph Steffan verses the United States, (2001) †¢Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  A.P.A Newsletter; (1997) Retrieved from: www.apa.udel.edu/apa/archive/newsletters/v97n1/law/military.asp

New Perspectives :: Personal Narratives Writing Education Essays

New Perspectives This is the first essay that I wrote for class. I was extremely nervous writing my first "college paper" but I ended up enjoying it very much. Although my writing skills and technique are a little unorganized and choppy, I can honestly say that this paper was the one that I most challenged myself creatively. It was pretty hard putting such awesome experiences into mere words, but I did my best. The paper obviously shows my writing level at the beginning of the class, but has been my favorite paper to write. Self- Evaluation I really enjoyed writing this paper because I love the topic. I try to re-live each event in my description and make it easier for the reader to relate to. I think the strengths of my paper would probably be my introduction and description. I don’t think I’m a very strong writer, so I had problems with organizing my ideas and writing my conclusion. If I had more time to write the paper, I would try to add more events that happened, and how to those events changed me. I think that would better support my thesis, and make a more interesting and developed paper. New Perspectives I am sitting straight up in my seat as the Jeep jostles down a bombed out city street. Dust flies as Aaron shifts into fifth gear and fumbles with his Nokia, trying to take a picture. My aunt is grasping the dash and frantically looking behind her shoulder. Soldiers in olive green uniforms are yelling at us in Turkish and trying to catch up. My Uncle is too fast and we duck into an alley, out of sight. We sit in stunned silence for about thirty seconds, and then burst out laughing. My Aunt Rikki, her fiancà © Aaron, and I had spent that spring day of 2001 on the Turkish side of the island of Cyprus. We had been attempting to take pictures of the ghost inner city of Famagusta. Famagusta had been off limits by the Turkish government since the 1974 invasion. What resulted was the exhilarating chase I just described. The drama of the story is exaggerated.

Toyota

Company Objectives World domination with regard to car supply. Toyota seeks to achieve market leadership by delivering value to customers and providing high quality vehicles. Ill. Analysis Of Related Case Facts A. Porters Five Forces Analysis 1. Threat of New Entrants – Low New entrants can't enter the market easily as it requires huge capital investment, cutting-edge technology and the industry have already reached economics of scale. Brand loyalty among the buyers. They won't easily switched to new brand as purchasing a vehicle incurred high cost. 2.Bargaining Power of Supplier – Moderately Low Various types of suppliers in automobile industry such as cooling, electrical, fuel supply systems distributed across the globe. They own many interchangeable supplier and produced many components in the short time. Suppliers don't own the power to determine the price. 3. Bargaining Power of Buyer – High Can easily switch to other brands if they're cheaper and better spe cifications such as Hand's new Hybrid models which are more lucrative Toyota Pries. 4. Threat of Substitute – Moderately High There are a lot of substitutes in automobile industry.When the price or the specifications of the vehicle is lack of favor, the substitutes will emerge. Besides from vehicles, buyer can opt for other substitutes such as bicycle, bus, train or even walking to reach their destination with petrol price hiking. However, it depends greatly on the consumers geographical location. 5. Competitive Rivalry -? High Competition between existing players is high. There is not much differentiation between players and their products. Other automobile companies are moving aggressively with their strategy to own higher market share with Hybrid models.B. Soot Analysis Strengths Us period productivity and efficiency of Toyota Production System Toyota is the world's largest vehicle manufacturer by production and sales Global strong brand awareness Strong distribution and m arket efforts focused on high quality, sales and close involvement with customers It has initiated new technologies Weaknesses Recalls caused quite severe financial impact It is criticized as a foreign importer by Japanese local car producers In May 2009, they reported a record yearly net loss of $ 4. Billion In 2005 faced criticism because of a large scale recall and quality issues Opportunities Recovery of auto industries Positive growth trend in hybrid vehicle segment Growing demand from major emerging markets India and China Demand for fuel efficient, compact vehicles In 2009 Bank of India decreased the interests on automotive bank loans Product innovation The retreats Competition in the global automotive market Uncertainty in global economic condition Weakening demand, increasing cost Tightening emission standards C.PEST Analysis Political Factors Laws and regulations mandated by the government/state/local assembles may put in measures to ensure that safe and ethical practices are being allowed to promote fairness within the company. On the other hand, these laws, especially those foreign to Japanese customs create policies that imposes more profit loss for TM because it is a foreign car company. Economic and Social Factors The first that may impact Tm's profit is that the social status of the world economy as a whole.If the world market is suffering due to a world-wide recession. Customers may be forced to buy domestic cars due to their lower cost, rather than buying foreign cars. However, if consumers are earning a higher income, this may prove beneficial to Toyota thereby increasing many profit and accountability. Stability of the upcoming market is highly projected. Technological Factors Technological advancements may also be a factor in determining Tm's overall production. The world relies heavily on technology to plan out the details and executions of company plans and goals.It would be wise for TM to continue its research developments to improve th e company's value and reputation. IV. Relevant Strategic Management Lean Production System Lean Production System is the system designed and evolved in Toyota. It is modified form of Henry Ford's Mass Production System. In some areas its philosophy seem exactly opposite to the fundamental principles of Mass Production System. Mass Production System Mass production is a method of producing goods in large quantities at low cost per unit. This system of production is also known as Push System or Just- in-Case System .With precision equipment, large numbers of identical parts could be produced at low cost and with a small work force. Diversification At the time of establishment of Toyota Motor Company was in the business of making handloom. This can be seen as a Conglomerate Diversification as Toyota expanded its scope from Handloom Industry to Automobile Industry. Joint Venture ANNUM was established at the site Of a former GM Fremont Assembly site that had been closed two years earlier in 1982. GM and Toyota reopened the factory as a joint venture in 1 984 to manufacture vehicles to be sold under both brands.A joint venture was viewed as an approach that would lower the risk while providing help in overcoming difficult potential problems. Market Segmentation Toast's most significant business segment is its automotive operations. Toyota carries out its automotive operations as a global competitor in the relied automotive market. Toast's uses both differentiation and low cost as generic strategies to try and gain a competitive advantage over their competitors in the automotive industry. The market scope that Toyota uses is a broad one that encompasses nearly every type of customer that is in the market to purchase an automobile.Toyota is able to target such a large market because they have something for everyone. V. Alternative Courses and Action Toyota Motors Corporation, one of the largest automakers in the world. Due to growing number of recalls that it faced, s ales plummeted thereby effecting the company's position in the global automotive industry. The company recalled million of vehicles in 2009 that does not only hurt the company financially but significantly damaged the company's brand. Toyota must ensure that the cars produced are faultless and of good quality.Toyota must focus on differentiating the company by concentrating on the atmosphere and design of the vehicles . It must enhance customers service as full-service provider. Excellent customer service should be observed since it would be able to make the company boost their reputation and consistency in terms of customer satisfaction. There should be a unique offering of amenities and facilities which would give them a stand out compared to other competitors, something like a trademark item or facility in which it couldn't be copied or duplicated.Toyota has a reputation of manufacturing CEO friendly cars like the Pries based upon advanced technology developed by the organization . Toyota has also sold on its technology to other motor manufacturers. There is a big demand for CEO friendly and fuel efficient cars. Since Toyota already has a first mover advantage in making hybrid CEO friendly cars, it should capitalize n this opportunity and invest more on hybrid R and produce more environment friendly cars. VI. Analysis of Alternatives (Advantages and Disadvantages) VII.Conclusion Toyota has sources of strong competitive advantages in global automotive industry such as value chain, strong brand, wide product offering and hybrid vehicles. Major recalls, economic crisis and intense global competition have posed serious challenge for Toyota. Growing emerging markets and shifting customer demands offer Opportunities for Toyota to attain superior profitability and growth. Toyota must sustain its competitive advantages to attain its position and achieve future success. VIII. Recommendations Toyota motors are famous for their just in time manufacturing.The organizati on is doing well in this regard and competes with the world's top car manufacturing firms . However the quality of the car as compare to other car manufacturing companies is not satisfactory. They should focus on the quality and designs of the car. As compare to Honda, the intense competitor of Toyota in Asia and some other regions, they have elegant designs and quality cars. Apart from that the company should also focus on fuel efficient and hybrid cars to increase its production and to make people aware of these cars.T MAC needs to become more diverse, to allow the integration Of leadership in all sectors of leaderships to create a uniform leadership team. The way the system is set up is not going too well for the company's goal of being the number one manufacturer in the world. Also, Toyota needs to reanalyze its Research and Developmental Centers. It is through these centers that technologies are observed and tested to bring about the best possible and safe product for the consu mer to use. There needs to be a construction of the company as a whole. Toyota Company Objectives World domination with regard to car supply. Toyota seeks to achieve market leadership by delivering value to customers and providing high quality vehicles. Ill. Analysis Of Related Case Facts A. Porters Five Forces Analysis 1. Threat of New Entrants – Low New entrants can't enter the market easily as it requires huge capital investment, cutting-edge technology and the industry have already reached economics of scale. Brand loyalty among the buyers. They won't easily witched to new brand as purchasing a vehicle incurred high cost. 2.Bargaining Power of Supplier – Moderately Low Various types of suppliers in automobile industry such as cooling, electrical, fuel supply systems distributed across the globe. They own many interchangeable supplier and produced many components in the short time. Suppliers don't own the power to determine the price. 3. Bargaining Power of Buyer – High Can easily switch to other brands if they're cheaper and better spec ifications such as Hand's new Hybrid models which are more lucrative Toyota Pries. 4. Threat of Substitute – Moderately High There are a lot of substitutes in automobile industry.When the price or the specifications of the vehicle is lack of favor, the substitutes will emerge. Besides from vehicles, buyer can opt for other substitutes such as bicycle, bus, train or even walking to reach their destination with petrol price hiking. However, it depends greatly on the consumers geographical location. 5. Competitive Rivalry -? High Competition between existing players is high. There is not much differentiation between players and their products. Other automobile impasse are moving aggressively with their strategy to own higher market share with Hybrid models.B. Soot Analysis Strengths Superior productivity and efficiency of Toyota Production System Toyota is the world's largest vehicle manufacturer by production and sales Global strong brand awareness Strong distribution and marke t efforts focused on high quality, sales and close involvement with customers It has initiated new technologies Weaknesses Recalls caused quite severe financial impact It is criticized as a foreign importer by Japanese local car producers In May 009, they reported a record yearly net loss of $ 4. Billion In 2005 faced criticism because of a large scale recall and quality issues Opportunities Recovery of auto industries Positive growth trend in hybrid vehicle segment Growing demand from major emerging markets India and China Demand for fuel efficient, compact vehicles In 2009 Bank Of India decreased the interests on automotive bank loans Product innovation Threats Competition in the global automotive market Uncertainty in global economic condition Weakening demand, increasing cost Tightening emission standards C. PEST Analysis Political FactorsLaws and regulations mandated by the government/state/local assembles may put in measures to ensure that safe and ethical practices are being followed to promote fairness within the company. On the other hand, these laws, especially those foreign to Japanese customs create policies that imposes more profit loss for TM because it is a foreign car company. Economic and Social Factors The first that may impact Tm's profit is that the social status of the world economy as a whole. If the world market is suffering due to a world-wide recession.Customers may be forced to buy domestic cars due to their lower cost, rather than buying foreign cars. However, if consumers are earning a higher income, this may prove beneficial to Toyota thereby increasing company profit and accountability. Stability of the upcoming market is highly projected. Technological Factors Technological advancements may also be a factor in determining Tm's overall production. The world relies heavily on technology to plan out the details and executions of company plans and goals. It would be wise for T MAC to continue its research developments to improve the company's value and reputation.IV. Relevant Strategic Management Lean Production System Lean Production System is the system designed and evolved in Toyota. It is modified form of Henry Ford's Mass Production System. In some areas its philosophy seem exactly opposite to the fundamental principles of Mass Production System. Mass Production System Mass production is a method of producing goods in large quantities at low cost per unit. This system of production is also known as Push System or Just- in-Case System . With precision equipment, large numbers of identical parts could be produced at low cost and with a small work force.Diversification At the time of establishment of Toyota Motor Company was in the business of making handloom. This can be seen as a Conglomerate Diversification as Toyota expanded its scope from Handloom Industry to Automobile Industry. Joint Venture ANNUM was established at the site of a former GM Fremont Assembly site that had been closed two years earlier in 1982. GM and Toyota reopened the factory as a joint venture in 1984 to manufacture vehicles to be sold under both brands. A joint venture was viewed as an approach that would lower the risk while providing help in overcoming difficult potential problems.Market Segmentation Toast's most significant business segment is its automotive operations. Toyota carries out its automotive operations as a global competitor in the worldwide automotive market. Toast's uses both differentiation and low cost as generic strategies to try and gain a competitive advantage over their competitors in the automotive industry'. The market scope that Toyota uses is a broad one that encompasses nearly every type of customer that is in the market to purchase an automobile. Toyota is able to target such a large market because they have something for everyone.V. Alternative Courses and Action Toyota Motors Corporation, one of the largest automakers in the world. Due to growing number of recalls that it faced, s ales plummeted thereby affecting the company's position in the global automotive industry. The company recalled million of vehicles in 2009 that does not only hurt the company financially but significantly damaged the company's brand. Toyota must ensure that the cars produced are faultless and of good quality. Toyota must focus on differentiating the company by concentrating on the atmosphere and design of the vehicles .It must enhance customers service s full-service provider. Excellent customer service should be observed since it would be able to make the company boost their reputation and consistency in terms of customer satisfaction. There should be a unique offering of amenities and facilities which would give them a stand out compared to other competitors, something like a trademark item or facility in which it couldn't be copied or duplicated. Toyota has a reputation of manufacturing CEO friendly cars like the Pries based upon advanced technology developed by the organization .Toyota has also sold on its technology to other motor manufacturers. There is a big demand for CEO friendly and fuel efficient cars. Since Toyota already has a first mover advantage in making hybrid CEO friendly cars, it should capitalize on this opportunity and invest more on hybrid R&D and produce more environment friendly cars. VI. Analysis of Alternatives (Advantages and Disadvantages) VI'. Conclusion Toyota has sources of strong competitive advantages in global automotive industry such as value chain, strong brand, wide product offering and hybrid vehicles.Major recalls, economic crisis and intense global competition have used serious challenge for Toyota. Growing emerging markets and shifting Customer demands offer opportunities for Toyota to attain superior profitability and growth. Toyota must sustain its competitive advantages to retain its position and achieve future success. VIII. Recommendations Toyota motors are famous for their just in time manufacturing. The organiza tion is doing well in this regard and competes with the world's top car manufacturing firms -However the quality of the car as compare to other car manufacturing companies is not satisfactory.They should focus on the quality ND designs of the car. As compare to Honda, the intense competitor of Toyota in Asia and some other regions, they have elegant designs and quality cars. Apart from that the company should also focus on fuel efficient and hybrid cars to increase its production and to make people aware of these cars. TM needs to become more diverse, to allow the integration of leadership in all sectors of leaderships to create a uniform leadership team. The way the system is set up is not going too well for the company's goal of being the number one manufacturer in the world. Toyota Toyota, one of the most renowned auto company started having a problem around in 1998 when it failed o store its new brand product Lexus’s data’s ineffectively. Though all it did not happen on purpose, but accidentally the Lexus Company could not fulfil the requirement and satisfaction of its customer in its early trail of database maintenance. Lexus the Toyotas high end luxury system had implemented a Corporate Customer information System in which there were some problems seen regarding the recording of customer information and override of wrong information of the customer data. Though the company had best tried to save that customer information in a appropriate manner but due to the system deficiency the company was having a massive data quality problem. This problem aroused because the company failed to maintain and implement a central database system where all he customer information would be stored in a central database, which when required would display the multi branches customer information. The company had 15 different databases stored in 15 different parts of the company, where the individual company would only access their local data stored by the local branch. In words of Management we can correlate this problem as lack of centralised authority to data control, storing, maintenance and update of recent transactions. The world of Information Technology as compared to the Management is quite controversial. Controversial in a sense that, in proper management Decentralization and Delegation of authority is required to achieve the best results in efficient management performances while as in terms of Information Technology, it requires the access, storage, support and maintenance of centralised database system in order to keep the up to date records of every activities performed everyday to track down the right solution to the problem. An efficient Information System demands the availability of information and resources however and whenever demanded at any point of request. The database Toyota Lexus ha designed was to store all its customer info which would help when the system was asked to provide the customer details of the owner for organizational purpose. The objective LEXUS had established to serve its customer via maintaining a customer dataset could not be fulfilled as the purpose of developing a database could no be fulfilled as it resulted to various problems in miscommunication of information all around. The ownership of the vehicles ad been transferred to the people who did not even had the ownership license, the cheques were paid to the person who were even not entitled to receive and the legitimate information were passed where there had been frequent problems of fake customer identity. The customer details failed to validate the right owners of the vehicles which as a result led to a problem of data loss. Because of the problem, Toyota would return the owners car fixed, washed filled with fuel. Cheques were made payable to the people whom it did not even belonged to. CASE EXAMPLES Example: 1 http://www. internetautoguide. om/auto-recalls/09-int/1998/lexus/gs400/index. html APR 17, 1998 | Recall ID# 50473 Hide Details |Recall Reason |SUSPENSION:AUTOMATIC STABILITY CONTROL (ASC) | |Recall Date |APR 17, 1998 | |Model Affected |GS400 | |Potential Units Affected |14855 | Recall Summary | |VEHICLE DESCRIPTION: PASSENGER VEHICLES. DUE TO A MANUFACTURING DEFECT OF THE YAW RATE SENSOR FOR THE VEHICLE STABILITY | |CONTROL (VSC), THE VSC CAN OPERATE IMPROPERLY IF THE SENSOR IS AFFECTED BY CERTAIN ELECTROMAGNETIC WAVES, SUCH AS FROM A | |CELLULAR PHONE. | |Consequence | |SHOULD THIS OCCUR, THE BRAKE MAY OPERATE UNEXPECTEDLY, AFFECTING STEERING AND SPEED CONTROL, INCREASING THE RISK OF A | |VEHICLE CRASH. |Remedy | |DEALERS WILL REPLACE THE YAW RATE SENSOR. | |Notes | |TOYOTA MOTOR CO. , LTD. | Example 2: http://www. justanswer. com/questions/35ik7-i-have-a-1998-lexus-es300-i-have-had-problems-with-the-gas Question I have a 1 998 Lexus ES300, I Have had problems with the gas pedals sticking on three occasions but paid no attention to it until I read about this problem on new cars. Have there been other cases reported with this model? What should I do about it? Submitted: 11 days and 23 hours ago. Category:  Lexus Value:  ? 7 Status:  CLOSED + Read  More Optional Information Year: 1998 Make: Lexus Model: ES300 Already Tried: I have a 1998 Lexus ES300, I Have had problems with the gas pedals sticking on three occasions but paid no attention to it until I read about this problem on new cars. Have there been other cases reported with this model? What should I do about it? Accepted Answer Hi, Your particular vehicle uses a mechanical, cable connection from the gas pedal to the throttle body as opposed to the electrical servo type throttles involved in the numerous recall related problems. Because of that, there would be no directly correlation between the two vehicles. That being said, there are 3 typical causes for sticking throttle in your vehicle. Least likely, but easiest to check is the infamous â€Å"floor mat obstruction†. This is typically noticeable while driving if your floor mat is interfering with the cable, but worth checking regardless. Second, is a worn out throttle cable. This is the cable that connects the gas pedal to the throttle body. Vehicles in northern states that have more issues with rust/corrosion are more likely to see a problem here. The cable is a thin metal wire sheathed in a plastic coating. As the exposed area of metal wire corrodes from environmental elements, it widens the cable making it more difficult to travel inside the cable sheath, often sticking. You can check this condition by operating the throttle body by hand an monitoring the cable to see if there is any resistance going into the sheath or if it travels smoothly. Lastly, and most common, is buildup of carbon/oil elements in the throttle body. Because of the ventilation system required by law, the throttle body is exposed to oil vapor from inside the engine via breathing hoses in the intake. Over time this builds up into a layer of hardened, baked-on oil inside the throttle body, right where the throttle plate needs to move. Due to it being softer than the metal throttle plate, the throttle plate always wins when it gets stuck, but the oil buildup does create resistance that will intermittently stick the throttle in position. Having the throttle body cleaned to prevent this should be done every 15k miles on this car for full assurance, or 30k miles at minimum for normal operation. Typical cost for cleaning is 1/2 hour labor (normal â€Å"minimum charge† at many shops), about $45 depending on the shops labor rate. pic] |Expert:   |Doug Cleland | |Pos. Feedback:   |100. 0 % | |Accepts:   |12 | |Answered:   |2/16/2010 | ASE Certified Technician Toyota Factory training and worked for a heavily Lexus trafficked Toyota store Read more: http://www. justanswer. com/questions/35ik7-i-have-a-1998-lexus-es300-i-have-had-problems-with-the-gas#ixzz0grgbynyy Example 3: http://www. motortrend. com/used_cars/07/1998/lexus/recalls/index. html Featured 1998 Recalls [pic] | |1998 Lexus LX470 | |Before you purchase a used car, make sure you check our comprehensive auto recall information to see if there are any | |problems that have been reported by the NHTSA. You can get detailed information on how and where to fix the car defect. | |Recall:   EXTERIOR LIGHTING : HEADLIGHTS | | | | | | | | | | Read more: http://www. motortrend. com/used_cars/07/1998/lexus/recalls/index. html#ixzz0grjp1yvD Take a noteworthy case in 1998. Toyota Motor Sales USA (TMS) responded to a recurring service problem with its Lexus vehicles by contacting owners, then picking up their vehicles, taking them in for repairs and leaving loaner cars as replacements. When done, the owners' cars were returned—fixed, washed and tanked up. That level of service was made possible by TMS's Corporate Customer Information System, an application used by the company's call center in Iowa to help handle warranty, roadside assistance, prepaid maintenance and other service requests. But 1998 didn't go altogether smoothly. Relying on data in that system, TMS began to mail checks to Lexus owners to replace troublesome tires. The checks, for more than $400 each, in some cases went to people who didn't even own a Lexus. One errant check even found its way to a Toyota auditor, for a vehicle he hadn't owned for a while. â€Å"You can imagine the repercussions of that,† says John Gonzales, data quality manager at TMS. â€Å"We can't afford to be giving money away to people who shouldn't be getting it. † The glitch was symptomatic of a bigger problem. The system depended on customer data stored in â€Å"roughly 15 databases in different parts of company,† says Gonzales. Just to get to all the data about a customer, call center employees would have to navigate through four or five mainframe applications, while customers waited. The glitch resulted in a mandate from Toyota's office of the president for a centralized, single customer database. And Gonzales was tagged to make it happen. â€Å"The main goal was to service customers' calls quicker,† he says. But also, â€Å"as the volume of calls went up, we didn't want to increase the number of people in the call center. † Finding a way to pull off the consolidation turned out to be no mean feat. Gonzales and his team looked at a procession of products purportedly offering business intelligence,† but none fit the bill. Then, a solution was nearly dropped into his lap. While attending a Toyota Toyota, one of the most renowned auto company started having a problem around in 1998 when it failed o store its new brand product Lexus’s data’s ineffectively. Though all it did not happen on purpose, but accidentally the Lexus Company could not fulfil the requirement and satisfaction of its customer in its early trail of database maintenance. Lexus the Toyotas high end luxury system had implemented a Corporate Customer information System in which there were some problems seen regarding the recording of customer information and override of wrong information of the customer data. Though the company had best tried to save that customer information in a appropriate manner but due to the system deficiency the company was having a massive data quality problem. This problem aroused because the company failed to maintain and implement a central database system where all he customer information would be stored in a central database, which when required would display the multi branches customer information. The company had 15 different databases stored in 15 different parts of the company, where the individual company would only access their local data stored by the local branch. In words of Management we can correlate this problem as lack of centralised authority to data control, storing, maintenance and update of recent transactions. The world of Information Technology as compared to the Management is quite controversial. Controversial in a sense that, in proper management Decentralization and Delegation of authority is required to achieve the best results in efficient management performances while as in terms of Information Technology, it requires the access, storage, support and maintenance of centralised database system in order to keep the up to date records of every activities performed everyday to track down the right solution to the problem. An efficient Information System demands the availability of information and resources however and whenever demanded at any point of request. The database Toyota Lexus ha designed was to store all its customer info which would help when the system was asked to provide the customer details of the owner for organizational purpose. The objective LEXUS had established to serve its customer via maintaining a customer dataset could not be fulfilled as the purpose of developing a database could no be fulfilled as it resulted to various problems in miscommunication of information all around. The ownership of the vehicles ad been transferred to the people who did not even had the ownership license, the cheques were paid to the person who were even not entitled to receive and the legitimate information were passed where there had been frequent problems of fake customer identity. The customer details failed to validate the right owners of the vehicles which as a result led to a problem of data loss. Because of the problem, Toyota would return the owners car fixed, washed filled with fuel. Cheques were made payable to the people whom it did not even belonged to. CASE EXAMPLES Example: 1 http://www. internetautoguide. om/auto-recalls/09-int/1998/lexus/gs400/index. html APR 17, 1998 | Recall ID# 50473 Hide Details |Recall Reason |SUSPENSION:AUTOMATIC STABILITY CONTROL (ASC) | |Recall Date |APR 17, 1998 | |Model Affected |GS400 | |Potential Units Affected |14855 | Recall Summary | |VEHICLE DESCRIPTION: PASSENGER VEHICLES. DUE TO A MANUFACTURING DEFECT OF THE YAW RATE SENSOR FOR THE VEHICLE STABILITY | |CONTROL (VSC), THE VSC CAN OPERATE IMPROPERLY IF THE SENSOR IS AFFECTED BY CERTAIN ELECTROMAGNETIC WAVES, SUCH AS FROM A | |CELLULAR PHONE. | |Consequence | |SHOULD THIS OCCUR, THE BRAKE MAY OPERATE UNEXPECTEDLY, AFFECTING STEERING AND SPEED CONTROL, INCREASING THE RISK OF A | |VEHICLE CRASH. |Remedy | |DEALERS WILL REPLACE THE YAW RATE SENSOR. | |Notes | |TOYOTA MOTOR CO. , LTD. | Example 2: http://www. justanswer. com/questions/35ik7-i-have-a-1998-lexus-es300-i-have-had-problems-with-the-gas Question I have a 1 998 Lexus ES300, I Have had problems with the gas pedals sticking on three occasions but paid no attention to it until I read about this problem on new cars. Have there been other cases reported with this model? What should I do about it? Submitted: 11 days and 23 hours ago. Category:  Lexus Value:  ? 7 Status:  CLOSED + Read  More Optional Information Year: 1998 Make: Lexus Model: ES300 Already Tried: I have a 1998 Lexus ES300, I Have had problems with the gas pedals sticking on three occasions but paid no attention to it until I read about this problem on new cars. Have there been other cases reported with this model? What should I do about it? Accepted Answer Hi, Your particular vehicle uses a mechanical, cable connection from the gas pedal to the throttle body as opposed to the electrical servo type throttles involved in the numerous recall related problems. Because of that, there would be no directly correlation between the two vehicles. That being said, there are 3 typical causes for sticking throttle in your vehicle. Least likely, but easiest to check is the infamous â€Å"floor mat obstruction†. This is typically noticeable while driving if your floor mat is interfering with the cable, but worth checking regardless. Second, is a worn out throttle cable. This is the cable that connects the gas pedal to the throttle body. Vehicles in northern states that have more issues with rust/corrosion are more likely to see a problem here. The cable is a thin metal wire sheathed in a plastic coating. As the exposed area of metal wire corrodes from environmental elements, it widens the cable making it more difficult to travel inside the cable sheath, often sticking. You can check this condition by operating the throttle body by hand an monitoring the cable to see if there is any resistance going into the sheath or if it travels smoothly. Lastly, and most common, is buildup of carbon/oil elements in the throttle body. Because of the ventilation system required by law, the throttle body is exposed to oil vapor from inside the engine via breathing hoses in the intake. Over time this builds up into a layer of hardened, baked-on oil inside the throttle body, right where the throttle plate needs to move. Due to it being softer than the metal throttle plate, the throttle plate always wins when it gets stuck, but the oil buildup does create resistance that will intermittently stick the throttle in position. Having the throttle body cleaned to prevent this should be done every 15k miles on this car for full assurance, or 30k miles at minimum for normal operation. Typical cost for cleaning is 1/2 hour labor (normal â€Å"minimum charge† at many shops), about $45 depending on the shops labor rate. pic] |Expert:   |Doug Cleland | |Pos. Feedback:   |100. 0 % | |Accepts:   |12 | |Answered:   |2/16/2010 | ASE Certified Technician Toyota Factory training and worked for a heavily Lexus trafficked Toyota store Read more: http://www. justanswer. com/questions/35ik7-i-have-a-1998-lexus-es300-i-have-had-problems-with-the-gas#ixzz0grgbynyy Example 3: http://www. motortrend. com/used_cars/07/1998/lexus/recalls/index. html Featured 1998 Recalls [pic] | |1998 Lexus LX470 | |Before you purchase a used car, make sure you check our comprehensive auto recall information to see if there are any | |problems that have been reported by the NHTSA. You can get detailed information on how and where to fix the car defect. | |Recall:   EXTERIOR LIGHTING : HEADLIGHTS | | | | | | | | | | Read more: http://www. motortrend. com/used_cars/07/1998/lexus/recalls/index. html#ixzz0grjp1yvD Take a noteworthy case in 1998. Toyota Motor Sales USA (TMS) responded to a recurring service problem with its Lexus vehicles by contacting owners, then picking up their vehicles, taking them in for repairs and leaving loaner cars as replacements. When done, the owners' cars were returned—fixed, washed and tanked up. That level of service was made possible by TMS's Corporate Customer Information System, an application used by the company's call center in Iowa to help handle warranty, roadside assistance, prepaid maintenance and other service requests. But 1998 didn't go altogether smoothly. Relying on data in that system, TMS began to mail checks to Lexus owners to replace troublesome tires. The checks, for more than $400 each, in some cases went to people who didn't even own a Lexus. One errant check even found its way to a Toyota auditor, for a vehicle he hadn't owned for a while. â€Å"You can imagine the repercussions of that,† says John Gonzales, data quality manager at TMS. â€Å"We can't afford to be giving money away to people who shouldn't be getting it. † The glitch was symptomatic of a bigger problem. The system depended on customer data stored in â€Å"roughly 15 databases in different parts of company,† says Gonzales. Just to get to all the data about a customer, call center employees would have to navigate through four or five mainframe applications, while customers waited. The glitch resulted in a mandate from Toyota's office of the president for a centralized, single customer database. And Gonzales was tagged to make it happen. â€Å"The main goal was to service customers' calls quicker,† he says. But also, â€Å"as the volume of calls went up, we didn't want to increase the number of people in the call center. † Finding a way to pull off the consolidation turned out to be no mean feat. Gonzales and his team looked at a procession of products purportedly offering business intelligence,† but none fit the bill. Then, a solution was nearly dropped into his lap. While attending a